FTTH GIGABIT ONT

Data
ESPOD ES800-1G ONT is delivered with one 10/100/1000 Base-T Ethernet data interface, supporting:
Auto-negotiation and MDI/MDIX auto-sensing
Built-in layer-2 switch
Advanced data features such as VLAN tag manipulation, classification, and filtering
Voice
To enable VoIP access, the ESPOD ES800-1G supports interfacing external IAD box or Home Router with voice capability through the Ethernet Interface.
Video
The ESPOD ES800-1G ONT supports video contents delivered in the form of data (by multicast or unicast).
In case where multicast technology is used for delivering video contents through data channel, the ONT supports the dedicated multicast GEM port on the Downstream. So the video contents are received and processed by all the ONTs through the unified channel and this greatly improves the bandwidth efficiency.
In addition, the ONT supports IGMP snooping function to be applied for further optimization. When IGMP snooping is enabled, the ONT monitors the member joining and leaving activities at the Ethernet service port, and then selectively delivers the multicast streams.

Dimensions

120mm x90mm x33mm (W x D x H)

Power Supply

+12V (feed via external AC/DC adapter)

2-PIN power adaptor input

Dying Gasp support

Power switch

Power Consumption: Less than 4W

Working Environment

Temperature: 0℃ ~ 50℃

Humidity: 5% ~ 95% relative humidity

Safety & EMI

CE certificate

FCC/UL compliant

Environmental Directive

RoHS6

Installation

Wall mounting & desktop mounting

GPON Interface

Compliant with ITU-T G.984 GPON standards

SFF type laser, SC/APC connector

CIG patented BoSA on board optical solution

1.244 Gbps Burst Mode Upstream Transmitter

2.488 Gbps Downstream Receiver

Compliant with ITU-T G.984.2 Amd1, Class B+

• +1dBm ~+5dBm launch power, -28dBm sensitivity, and -8dBm overload

Compliant with ITU-T G.984.2 Amd1, Class C+ (optional)

• +1dBm ~+5dBm launch power, -30dBm sensitivity, and -8dBm overload

Wavelengths:

• US 1310nm, DS 1490nm

Laser compliant with FCC 47 CFR Part 15, Class B, and FDA 21 CFR 1040.10 and 1040.11, Class I

Support G.984.5 Blocking Filter

Multiple T-CONTs per device

Multiple GEM Ports per device

Flexible mapping between GEM Ports and T-CONT

Activation with automatic discovered SN and password in conformance with ITU-T G.984.3

AES-128 Decryption with key generation and switching

FEC (Forward Error Correction) in both directions

DBA reporting by piggyback reports in the DBRu (mode 0 and mode 1)

802.1p mapper service profile on U/S

Mapping of GEM Ports into a T-CONT with priority queues based scheduling

Support Multicast GEM port and incidental broadcast GEM port.

Ethernet Interface

10/100/1000 Base-T interface with RJ-45 connectors

Ethernet port auto negotiation or manual configuration

MDI/MDIX automatically sense

Hardware priority queues on the downstream direction in support of CoS

802.1D bridging

Virtual switch based on 802.1q VLAN

VLAN tagging/detagging per Ethernet port

VLAN stacking (Q-in-Q) and VLAN Translation

IP ToS/DSCP to 802.1p mapping

Class of Service based on VLAN-ID, 802.1p bit, ToS/DSCP

Marking/remarking of 802.1p

IGMP v2/v3 snooping

Broadcast/Multicast rate limiting
OAM

Standard compliant OMCI (the embedded operations channel) interface as defined by ITU-T G.988

Provisioning all kinds of services including Ethernet etc.

Alarming and performance monitoring

Remotely software image download over OMCI, as well as activation and rebooting

Hold two software sets with software image integrity checking and automatic rollback

Contact form description text