- General Details
ESPOD ES-2444C is a best-in-class 802.11n indoor access point designed specifically for business-class environments such as hotels, airports, coffee shops, shopping centers, sporting venues, and university campus. With transfer rates of up to 300Mbps in the 2.4 GHz frequency range, the device provides an adequate level of service to all users who connect with legacy 802.11b/g adapters in addition to the latest 802.11n adapters for faster downloads and instant communication. Integrated Power over Ethernet (PoE) allows installation in areas where power outlets are not readily available. Internally equipped with 2X2 multiple-input, multiple-output (MIMO) antennas improve range and maximize data rates. Field tested to wirelessly cover 8-10 hotel rooms at an indoor operating distance of 40-50 meters and allow simultaneous accesses by up to 30 users.
- Technical Info
Stylish Ceiling Mount Design
Housed in a stylish ceiling mountable case, the ES-2444C can be installed on a wall or ceiling just as a ceiling lamp and blends in nicely with most interior decorations in a modern hotel. Installed highly on ceiling, it extends optimum wireless signal to multiple neighboring rooms.
High Power and Whole Coverage
With 500mW high power, Internally equipped with 2X2 multiple-input, multiple-output (MIMO) 5dBi Airgain antennas improve range and maximize data rates. Field tested to wirelessly cover 8~10 hotel rooms at an indoor operating distance of 60 meters and allow simultaneous accesses by up to 57 users. Up to 300Mbps wireless rate ensures multiple users an adequate level of service.
Power over Ethernet
The device has integrated Power over Ethernet (PoE) for easy installation and lower cost, with 24V passive PoE, it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
VLAN and Access Controller System
This ES-2444C comply with 802.1Q standard, it create a separate, secure, password protected network for guests.
With Access Control System, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore….
Work with AP Address Server, can be assigned IP address auto when power on!
Specification Hardware MCU MTK 7620A RF 2T2R, 300Mbps MIMO tech , comply with IEEE 802.11N standard Memory 64MB DDR RAM Flash 8MB Interface 2 x RJ-45 for 10/100 Mbps WAN/LAN Port (Support 12V/24V POE) 1 x Reset button(Reset & Factory Defaults) 1 x Power DC Jack Power 12V(POE 12V/24V)/1A; or 802.3af, 48V PoE, 110V/220V Antenna Build in 2PCS Omni 5dbi antenna Size 16.8*4.5CM RF Frequency 802.11b/g/n, 580MHz 2.4~2.4835GHz U.S.,Europe and Japan product covering 2.400 to 2.4835 GHz,programmable for different country regulations Modulation OFDM = BPSK,QPSK, 16-QAM, 64-QAM DSSS = DBPSK, DQPSK, CCK Throughput 300 Mbps Sensitivity 802.11n(2.4GHz) 802.11g 802.11b -90dBm @ MCS0 – 90dBm @ 6Mbps – 95dBm @ 1Mbps -70dBm @ MCS7 – 72dBm @ 54Mbps – 90dBm @ 11Mbps -90dBm @ MCS8 -68dBm @ MCS15 Output Power Radio1(WLAN1) 802.11n(2.4GHz)(± 1.5dBm) 802.11g(± 1.5dBm) 802.11b(±1.5dBm) 24dBm@ MCS0~2/MCS8~10 24dBm @ 6~24Mbps 27dBm @1~11Mbps 24dBm @ MCS3/MCS11 24dBm @ 36Mbps 24dBm @ MCS4/MCS12 24dBm @ 48Mbps 24dBm @ MCS5/MCS13 24dBm @ 54Mbps 24dBm @ MCS6/MCS14 24dBm @ MCS7/MCS15 Software Operation Mode Gateway/ AP/ Repeater Protocol/Standard IEEE 802.3(Ethernet) IEEE 802.3u(Fast Ethernet) IEEE 802.11b/g/n(2.4G WLAN) Wireless Auto-Channel selection Distance Control (802.1x Ack timeout) Multiple SSID (4 SSID) BSSID Security WEP Encryption-64/128/152 bit WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) Hide SSID Management System Settings Web-based configuration (HTTP/Telnet) Firmware Upgrade Upgrade firmware via web browser or TFTP Administration Admin Password can be configured System monitoring Status in hand , useful statistic and Event log Logs Supports local logs, logs host, logs file export Reset Reset or factory defaults Backup Restore settings & configuration of the device to local file Physical Property Temperature Working: 0°C~55°C Storage: -20°C to 70°C Humidity 5%~95% (typical) Package ES-2444C complete set PoE Adapter User Manual 90mm LAN Cable
- Order Enquiry
Contact form description text